Plastic Waste Pet Bottle HDPE Film PP Woven Bag Washing Granulating Recycling Machine
1. This mineral water bottle recycling mainly used for dealing with waste PET bottle, barrel etc.
2. To separate PET bottles to flakes from label, cap, oil, garbage.
3. This PET bottle washing machine is composed of separator, crusher, cold & hot washing system, dewatering, drying, packing system, etc.
4. Easy to operate,Full automatic.
Working flow of plastic pet bottle recycling machine/plastic recycling plant/pet bottle washing line
Conveying PET bottle→lable remover→ manual sorting table → wet crusher→screw loader →Hot washer→screw loader→high speed friction washer→screw loader→floating washer→screw loader→spray washer → dewater machine → pipe line dryer → label seperator → blower → hopper
Basic specification of plastic pet bottle recycling machine/plastic recycling plant/pet bottle washing line
| Product capacity |
300kg/h |
500kg/h |
1000kg/h |
1500kg/h |
| Workshop(L*W*H) |
40m*7.5m*6m |
42m*10m*6m |
70m*12m*6m |
75m*15m*6m |
| Needed worker |
3-4 persons |
5-6persons |
7-8persons |
10-12persons |
Water supply
(recycle use) |
2-3ton/h |
3-5ton/h |
7-10ton/h |
10-15ton/h |
Final product |
Moisture: max 3%
Bulk density: 0.3G/CM3
Particle size: 10-18mm
Metal content: max.20ppm
Floatable contamination: less than 200ppm
Total impurity: 100-320ppm |
common configuration of pet bottle plastic recycling machine/plastic washing machine/waste plastic bottle recycling plant
| No. |
Equipment Name |
Quantity |
Comments |
| 1 |
Belt conveyor |
1 set |
|
| 2 |
Bag opener |
1 set |
Optional |
| 3 |
Belt conveyor |
1 set |
|
| 4 |
Trommel |
1 set |
Optional |
| 5 |
Belt conveyor |
1 set |
|
| 6 |
Manual sorting conveyor |
1 set |
Optional |
| 7 |
Belt conveyor |
1 set |
|
| 8 |
Crusher |
1-2 sets |
|
| 9 |
Screw conveyor |
1 set |
|
| 10 |
Washing tank |
1 set |
|
| 11 |
Screw conveyor |
1 set |
|
| 12 |
Cooking boiler or Horizontal Hot washer |
1-2 sets |
|
| 13 |
Screw conveyor |
1 set |
|
| 14 |
High-speed washer |
1 set |
|
| 15 |
Washing tank |
1 set |
|
| 16 |
Screw conveyor |
1 set |
|
| 17 |
Horizontal Dewatering Machine |
1 set |
|
| 18 |
Cyclone separator |
1 set |
|
| 19 |
Drying system |
1 set |
|
| 20 |
Label separator |
1-2 sets |
We can equipped with two label separators in the whole line, one at the beginning, another at the end |
| 21 |
Final product silo |
1 set |
|
| 22 |
Control System |
1 set |
|
Our Service
1. Turn key project
2. Technical documents
We will offer you all necessary documents, e.g. general layout plan, water scheme, electrical diagram and user manual after the contract is executed.
3.Arrangement for inspection, installation and testing work
We will inspect and test the machine in our factory first before shipping the machine. Customers are welcome to come and check the working machine, until the machine produces the exact products as customers requirements, and learn operation in our factory.
After the machine is delivered to customer's factory, we will send one or two technicians to customer's factory for on-site installation and commissioning of the whole machine line. Meanwhile, technicians will give free training lessons to workers in customer's factory.
4.The guarantee period of the whole machine is 12 months.
5.Technical support from our factory is free of charge for all the life; quick response to any questions from customers.
Why choose us:
1. Low cost : all the machines ,we make them by ourself to reduce the cost for our customers.
2. Genuine product with excellent quality : we choose our material very strict, all the material come to our factory must pass the quality test substandard goods are returned to the supplier.
3. Engerneers available to serve oversea.
4. Quick delivery: the company provide just in time delivery with its streamlined supply chain.
5. Cost saving: we take strong attention to every detail in the manufacturing process,the quality control in our factory is very strict, all defective semi-manufactures must be treated again or reject. all the machine must be checked out ,then deivered to our customer. all about that pushing up the price, what we want to do is give our customer a good quality product with stable working and long lived.
FAQ
1.Q: Are you an industry manufacture factory or a foreign trade company?
A: We are an industrial manufacture factory of plastic extrusion machinery and auxiliary equipment, which locates in Zhangjiagang city, China.
A: Loading Port: Shanghai by sea or by train.
2.Q: Payment term:
T/T, L/C, West Union, or Cash, etc.
3.Q: Do you have any other services for your products?
A: We have rich experience in manufacturing plastic machinery, so we can manufacture various machines according to customers' requirement.
4. Q:How do you make the quotation for clients?
A:The price depends on quality and performance but the clients should be satisfied first.
Audited Supplier 
){kind=link}
){kind=link}